AIRKOOL HP 2-CYCLE MOTOR OIL

API TC ENGINE OIL FOR AIR-COOLED, 2-STROKE CYCLE ENGINES

Phillips 66® Airkool HP 2-Cycle Motor Oil is a premium quality, low-ash, API TC engine oil specially formulated for use in high-output commercial chain saws, motorcycles and other air-cooled 2-stroke cycle gasoline engines. It may be used in either direct oil injection or premix engines.

AIRKOOL HP 2-CYCLE MOTOR OIL

Features & Benefits

  • Low-ash formulation helps minimize engine deposits and pre-ignition
  • High detergency helps minimize piston ring sticking and reduce exhaust port blocking
  • Protects against piston and cylinder scuffing
  • Reduces spark plug fouling
  • Excellent rust and corrosion protection
  • Meets JASO FD low-smoke requirements
  • Keeps engine parts clean
  • Mixes easily with gasoline at low temperatures for premix applications
  • Dyed for easy visibility when mixed with gasoline
  • Suitable for either direct oil injection or premix engines(2)

    (2)Note: For premix engines, always follow the manufacturer’s recommendation for choosing the proper fuel-to-oil mixing ratio.

Applications

  • High-output commercial chain saws that operate at 17,000-20,000 rpm
  • Motorcycles, scooters, and all-terrain vehicles (ATVs)
  • Lawn-care equipment (mowers, weed trimmers, leaf blowers)
  • Other air-cooled 2-stroke cycle gasoline engines where an API TC oil is specified(1)

    (1)Note: Airkool HP 2-Cycle Motor Oil is not recommended for use in water-cooled 2-stroke cycle engines. Where the engine manufacturer specifies NMMA TC-W3®, TC-WII®, or TC-W® quality oil, use Phillips 66 2T Unimix® 2-Cycle Motor Oil.

Technical Details

  • Specific Gravity @ 60°F: 0.858
  • Licenses & Approvals

    Airkool HP 2-Cycle Motor Oil meets or exceeds the requirements of: #API Service TC #ISO-L-EGD #JASO FD, FC, FB

    Additional Details

    Specific Gravity @ 60°F 0.858
    Density, lbs/gal @ 60°F 7.14
    Color, ASTM D1500 Blue
    Flash Point (COC), °C (°F) 78 (172)
    Flash Point (PMCC), °C (°F) 73 (163)
    Pour Point, °C (°F) -40 (-40)
    Viscosity, Kinematic
    cSt @ 40°C 48.4
    cSt @ 100°C 8.3
    Viscosity Index 147
    Sulfated Ash, ASTM D874, wt % 0.11