EXTRA DUTY GEAR OIL

PREMIUM EXTREME-PRESSURE INDUSTRIAL GEAR OIL; FORMULATED WITH "CLEAN GEAR" ADDITIVE TECHNOLOGY

Phillips 66® Extra Duty Gear Oil is a premium quality, heavy-duty, extreme pressure (EP) industrial gear oil developed for the lubrication of heavily loaded enclosed gear drives operating under moderate to severe service conditions. It is specially formulated with “clean gear” additive technology to minimize deposit formation and provide excellent gearbox cleanliness. It is recommended for use in all applications where the equipment manufacturer specifies an AGMA EP gear oil.

EXTRA DUTY GEAR OIL

Features & Benefits

  • High load-carrying capacity for protection against scuffing and wear
  • Excellent oxidation resistance and thermal stability
  • Excellent deposit control for gearbox cleanliness
  • Protects against rust and corrosion
  • Fast water separation
  • Quick foam release
  • Effective mist suppression (“M” grades)

Applications

  • Enclosed industrial gear drives operating under heavy loads, high peak loads or intermittent shock loads
  • Enclosed spur, bevel, helical, herringbone and planetary gear drives where the equipment manufacturer specifies an AGMA EP gear oil
  • Heavily loaded plain and rolling-element bearings

Technical Details

  • 68
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 68
    AGMA Grade 2 EP
    Specific Gravity @ 60°F 0.876
    Density, lbs/gal @ 60°F 7.29
    Color, ASTM D1500 3
    Flash Point (COC), °C (°F) 235 (455)
    Pour Point, °C (°F) -33 (-27)
    Viscosity
    cSt @ 40°C 68
    cSt @ 100°C 8.7
    SUS @ 100°F 353
    SUS @ 210°F 55.5
    Viscosity Index 99
    Acid Number, ASTM D974, mg KOH/g 0.73
    Copper Corrosion, ASTM D130 1a
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball EP, ASTM D2783, Weld Load, kgf ---
    Four-Ball Wear, ASTM D4172
    Scar Diameter, mm 0.3
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage 12
    Timken OK Load, ASTM D2782, lb ---
  • 100
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 100
    AGMA Grade 3 EP
    Specific Gravity @ 60°F 0.88
    Density, lbs/gal @ 60°F 7.33
    Color, ASTM D1500 3.5
    Flash Point (COC), °C (°F) 235 (455)
    Pour Point, °C (°F) -33 (-27)
    Viscosity
    cSt @ 40°C 100
    cSt @ 100°C 11.3
    SUS @ 100°F 522
    SUS @ 210°F 65
    Viscosity Index 99
    Acid Number, ASTM D974, mg KOH/g 0.73
    Copper Corrosion, ASTM D130 1a
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball EP, ASTM D2783, Weld Load, kgf ---
    Four-Ball Wear, ASTM D4172
    Scar Diameter, mm 0.3
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage 12
    Timken OK Load, ASTM D2782, lb ---
  • 150
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 150
    AGMA Grade 4 EP
    Specific Gravity @ 60°F 0.884
    Density, lbs/gal @ 60°F 7.36
    Color, ASTM D1500 4
    Flash Point (COC), °C (°F) 243 (469)
    Pour Point, °C (°F) -33 (-27)
    Viscosity
    cSt @ 40°C 150
    cSt @ 100°C 14.4
    SUS @ 100°F 789
    SUS @ 210°F 77.3
    Viscosity Index 93
    Acid Number, ASTM D974, mg KOH/g 0.73
    Copper Corrosion, ASTM D130 1a
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball EP, ASTM D2783, Weld Load, kgf 250
    Four-Ball Wear, ASTM D4172
    Scar Diameter, mm 0.3
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage >12
    Timken OK Load, ASTM D2782, lb 60
  • 220
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 220
    AGMA Grade 5 EP
    Specific Gravity @ 60°F 0.888
    Density, lbs/gal @ 60°F 7.4
    Color, ASTM D1500 4.5
    Flash Point (COC), °C (°F) 252 (486)
    Pour Point, °C (°F) -27 (-17)
    Viscosity
    cSt @ 40°C 220
    cSt @ 100°C 18.4
    SUS @ 100°F 1166
    SUS @ 210°F 94.2
    Viscosity Index 92
    Acid Number, ASTM D974, mg KOH/g 0.73
    Copper Corrosion, ASTM D130 1a
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball EP, ASTM D2783, Weld Load, kgf 250
    Four-Ball Wear, ASTM D4172
    Scar Diameter, mm 0.3
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage >12
    Timken OK Load, ASTM D2782, lb 60
  • 220M
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 220M
    AGMA Grade 5 EP
    Specific Gravity @ 60°F 0.888
    Density, lbs/gal @ 60°F 7.39
    Color, ASTM D1500 4
    Flash Point (COC), °C (°F) 243 (469)
    Pour Point, °C (°F) -21(-6)
    Viscosity
    cSt @ 40°C 220
    cSt @ 100°C 19
    SUS @ 100°F 1163
    SUS @ 210°F 97
    Viscosity Index 97
    Acid Number, ASTM D974, mg KOH/g 0.73
    Copper Corrosion, ASTM D130 1a
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball EP, ASTM D2783, Weld Load, kgf 250
    Four-Ball Wear, ASTM D4172
    Scar Diameter, mm 0.3
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage >12
    Timken OK Load, ASTM D2782, lb 60
  • 320
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 320
    AGMA Grade 6 EP
    Specific Gravity @ 60°F 0.892
    Density, lbs/gal @ 60°F 7.42
    Color, ASTM D1500 5
    Flash Point (COC), °C (°F) 254 (489)
    Pour Point, °C (°F) -18 (0)
    Viscosity
    cSt @ 40°C 320
    cSt @ 100°C 23.7
    SUS @ 100°F 1706
    SUS @ 210°F 118
    Viscosity Index 94
    Acid Number, ASTM D974, mg KOH/g 0.73
    Copper Corrosion, ASTM D130 1a
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball EP, ASTM D2783, Weld Load, kgf 250
    Four-Ball Wear, ASTM D4172
    Scar Diameter, mm 0.3
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage >12
    Timken OK Load, ASTM D2782, lb 60
  • 460
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 460
    AGMA Grade 7 EP
    Specific Gravity @ 60°F 0.895
    Density, lbs/gal @ 60°F 7.46
    Color, ASTM D1500 5.5
    Flash Point (COC), °C (°F) 254 (489)
    Pour Point, °C (°F) -18 (0)
    Viscosity
    cSt @ 40°C 460
    cSt @ 100°C 30.5
    SUS @ 100°F 2466
    SUS @ 210°F 150
    Viscosity Index 96
    Acid Number, ASTM D974, mg KOH/g 0.73
    Copper Corrosion, ASTM D130 1a
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball EP, ASTM D2783, Weld Load, kgf 250
    Four-Ball Wear, ASTM D4172
    Scar Diameter, mm 0.38
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage >12
    Timken OK Load, ASTM D2782, lb 60
  • 460M
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 460M
    AGMA Grade 7 EP
    Specific Gravity @ 60°F 0.894
    Density, lbs/gal @ 60°F 7.44
    Color, ASTM D1500 5.5
    Flash Point (COC), °C (°F) 246 (276)
    Pour Point, °C (°F) -15 (5)
    Viscosity
    cSt @ 40°C 460
    cSt @ 100°C 30.4
    SUS @ 100°F 2466
    SUS @ 210°F 149
    Viscosity Index 95
    Acid Number, ASTM D974, mg KOH/g 0.73
    Copper Corrosion, ASTM D130 1a
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball EP, ASTM D2783, Weld Load, kgf 250
    Four-Ball Wear, ASTM D4172
    Scar Diameter, mm 0.38
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage >12
    Timken OK Load, ASTM D2782, lb 60
  • 680
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 680
    AGMA Grade 8 EP
    Specific Gravity @ 60°F 0.91
    Density, lbs/gal @ 60°F 7.57
    Color, ASTM D1500 8
    Flash Point (COC), °C (°F) >300 (>572)
    Pour Point, °C (°F) -3 (27)
    Viscosity
    cSt @ 40°C 680
    cSt @ 100°C 32.2
    SUS @ 100°F 3725
    SUS @ 210°F 158
    Viscosity Index 70
    Acid Number, ASTM D974, mg KOH/g 0.73
    Copper Corrosion, ASTM D130 1b
    Foam Test, ASTM D892, Seq. I, mL 10/0
    Four-Ball EP, ASTM D2783, Weld Load, kgf 250
    Four-Ball Wear, ASTM D4172
    Scar Diameter, mm 0.38
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage >12
    Timken OK Load, ASTM D2782, lb 60
  • 800
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 800
    AGMA Grade
    Specific Gravity @ 60°F 0.896
    Density, lbs/gal @ 60°F 7.46
    Color, ASTM D1500 >300 (>572)
    Flash Point (COC), °C (°F) -12 (10)
    Pour Point, °C (°F)
    Viscosity 800
    cSt @ 40°C 50.1
    cSt @ 100°C 4596
    SUS @ 100°F 243
    SUS @ 210°F 110
    Viscosity Index 0.73
    Acid Number, ASTM D974, mg KOH/g 1b
    Copper Corrosion, ASTM D130 10/0
    Foam Test, ASTM D892, Seq. I, mL 250
    Four-Ball EP, ASTM D2783, Weld Load, kgf
    Four-Ball Wear, ASTM D4172 0.38
    Scar Diameter, mm
    FZG Scuffing Test, ASTM D5182 >12
    Failure Load Stage 60
    Timken OK Load, ASTM D2782, lb
  • 1000
  • Licenses & Approvals

    Extra Duty Gear Oil meets the requirements of the following industry specifications: #ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1, Type L-CKC#U.S. Steel 224

    Additional Details

    ISO Grade 1000
    AGMA Grade 8A EP
    Specific Gravity @ 60°F 0.924
    Density, lbs/gal @ 60°F 7.69
    Color, ASTM D1500 8
    Flash Point (COC), °C (°F) >300 (>572)
    Pour Point, °C (°F) 0 (32)
    Viscosity
    cSt @ 40°C 1000
    cSt @ 100°C 39.5
    SUS @ 100°F 39.5
    SUS @ 210°F 193
    Viscosity Index 66
    Acid Number, ASTM D974, mg KOH/g 0.73
    Copper Corrosion, ASTM D130 1b
    Foam Test, ASTM D892, Seq. I, mL 10/0
    Four-Ball EP, ASTM D2783, Weld Load, kgf 250
    Four-Ball Wear, ASTM D4172
    Scar Diameter, mm 0.38
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage >12
    Timken OK Load, ASTM D2782, lb 60