GEAR SHIELD® SYNTHETIC

CHLORINE-FREE, SOLVENT-CUTBACK SYNTHETIC OPEN GEAR LUBRICANT

Phillips 66® Gear Shield Synthetic is a viscous, adhesive, transparent synthetic based gear lubricant with a low viscosity sacrificial diluent for ease of application. It is recommended primarily for the lubrication and cushioning of open and semi-enclosed gears found on stationary equipment, such as ball and rod mills, kilns and paper mills.

You are currently viewing GEAR SHIELD® SYNTHETIC

Features & Benefits

  • Excellent adhesion to metal surfaces
  • Forms a heavy, tenacious film to lubricate and cushion gear teeth
  • Good extreme-pressure properties for protection under heavy or shock loads
  • Good resistance to water washout
  • Protects against rust and corrosion
  • Will not flake off at low temperatures
  • Drains freely from gear guards
  • Does not contain any chlorine, lead or carcinogens
  • Easy application, by spraying, brushing or dripping
  • Suitable for use with automatic lubrication equipment

Applications

  • Open and semi-enclosed gears, such as those found on mining ball and rod mills, cement mills, drying kilns, and papermaking machinery and presses
  • Mills used to process minerals such as gold, copper, iron, taconite and phosphate
  • Guides and sliding surfaces with large clearances, where asphaltic-type lubricants are specifi ed
  • Cables on draglines, clamshells, shovels, hoists and other cable-operated equipment where cable clamp safety devices are not used

Technical Details

  • Grade: Synthetic
  • Licenses & Approvals

    Gear Shield Synthetic meets the requirements of the following industry specification:

    #ANSI/AGMA Standard 9005-E02

    Additional Details

    Grade Synthetic
    Specific Gravity @ 60°F 0.913
    Density, lbs/gal @ 60°F 7.6
    Color, Visual Amber
    Color, ASTM D1500 2
    Appearance Viscous
    Consistency Semi-fluid
    Flash Point (COC), with diluent, °C (°F) >150 (>302)
    Viscosity (with diluent)
    cSt @ 40°C 55100
    SUS @ 100°F 255225
    Viscosity (without diluent)
    Four-Ball EP, ASTM D2596:
    Weld Load, kgf, without diluent 620
    Load-Wear Index, kgf, without diluent 128
    Rust Test, ASTM D665 A&B Pass
    Usable Temperature Range:
    °C -18 to 49
    °F 0 to 120
Search this website Type then hit enter to search