MEGAFLOW® AW ULTRA-CLEAN HYDRAULIC OIL

HIGH-QUALITY ANTI-WEAR HYDRAULIC OIL; MEETS ISO CLEANLINESS CODE 17/15/1

Phillips 66® Megaflow AW Ultra-Clean Hydraulic Oil is a high-quality anti-wear hydraulic oil developed for use in industrial and mobile hydraulic systems that require an oil with a high level of fluid cleanliness. It provides the same performance benefits as Megaflow AW Hydraulic Oil, plus it is filtered to a typical ISO Cleanliness Code of 17/15/11 for use in hydraulic systems with tight tolerances where particle contamination can cause operational problems.

MEGAFLOW® AW ULTRA-CLEAN HYDRAULIC OIL

Features & Benefits

  • Excellent wear protection for hydraulic pumps and motors
  • Reliable operation of hydraulic valves and actuators
  • Excellent oxidation resistance and thermal stability
  • Protects against rust and corrosion
  • Excellent water-separating properties
  • Good foam resistance
  • Meets ISO Cleanliness Code rating of 17/15/11 (1)
  • (1) Note: Applies only to unopened packaged containers delivered from Phillips 66® manufacturing plants. Particle counts may vary from lab to lab.

Applications

  • Hydraulic systems on industrial, mobile and marine equipment, especially where particle contamination can cause operational problems
  • Automated machine tools
  • Hydraulic elevators, hoists, presses and floor jacks
  • Marine cargo winches and steering systems
  • Service station lifts
  • Air tools and other pneumatic equipment lubricated through air line lubricators
  • Chain drives
  • Electric motor bearings

Technical Details

  • ISO Grade: 32
  • Licenses & Approvals

    Megaflow AW Ultra-Clean Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Eaton-Vickers I-286-S, M-2950-S #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #Parker Hannifin (Denison) HF-0, HF-1, HF-2 #U.S. Steel 127

    Additional Details

    ISO Grade 32
    Specific Gravity @ 60°F 0.862
    Density, lbs/gal @ 60°F 7.18
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 216 (421)
    Pour Point, °C (°F) -37 (-35)
    Viscosity
    cSt @ 40°C 32
    cSt @ 100°C 5.4
    SUS @ 100°F 150
    SUS @ 210°F 44
    Viscosity Index 102
    Acid Number, ASTM D974, mg KOH/g 0.38
    Copper Corrosion, ASTM D130 1a
    Demulsibility, ASTM D1404, minutes to pass 10
    Dielectric Strength, ASTM D877, kV(2) 35
    Foam Test, ASTM D892, Seq. I, mL 0/0
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage 12
    Oxidation Stability
    TOST, ASTM D943-04a, hours >5,000
    Rust Test, ASTM D665 A&B Pass
    Zinc, wt % 0.043
    Cleanliness Code, ISO 4460:1999 (2) 17/15/11
  • ISO Grade: 46
  • Licenses & Approvals

    Megaflow AW Ultra-Clean Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Eaton-Vickers I-286-S, M-2950-S #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #Parker Hannifin (Denison) HF-0, HF-1, HF-2 #U.S. Steel 127

    Additional Details

    ISO Grade 46
    Specific Gravity @ 60°F 0.869
    Density, lbs/gal @ 60°F 7.24
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 227 (441)
    Pour Point, °C (°F) -37 (-35)
    Viscosity 46
    cSt @ 40°C 6.8
    cSt @ 100°C 214
    SUS @ 100°F 48.5
    SUS @ 210°F 102
    Viscosity Index 0.38
    Acid Number, ASTM D974, mg KOH/g 1a
    Copper Corrosion, ASTM D130 10
    Demulsibility, ASTM D1404, minutes to pass 35
    Dielectric Strength, ASTM D877, kV(2) 0/0
    Foam Test, ASTM D892, Seq. I, mL
    FZG Scuffing Test, ASTM D5182 12
    Failure Load Stage
    Oxidation Stability >5,000
    TOST, ASTM D943-04a, hours Pass
    Rust Test, ASTM D665 A&B 0.043
    Zinc, wt % 17/15/11
    Cleanliness Code, ISO 4460:1999 (2)
  • ISO Grade: 68
  • Licenses & Approvals

    Megaflow AW Ultra-Clean Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Eaton-Vickers I-286-S, M-2950-S #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #Parker Hannifin (Denison) HF-0, HF-1, HF-2 #U.S. Steel 127

    Additional Details

    ISO Grade 68
    Specific Gravity @ 60°F 0.874
    Density, lbs/gal @ 60°F 7.27
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 238 (460)
    Pour Point, °C (°F) -33 (-27)
    Viscosity 68
    cSt @ 40°C 8.7
    cSt @ 100°C 315
    SUS @ 100°F 54.9
    SUS @ 210°F 99
    Viscosity Index 0.38
    Acid Number, ASTM D974, mg KOH/g 1a
    Copper Corrosion, ASTM D130 10
    Demulsibility, ASTM D1404, minutes to pass 35
    Dielectric Strength, ASTM D877, kV(2) 0/0
    Foam Test, ASTM D892, Seq. I, mL 12
    FZG Scuffing Test, ASTM D5182 >5,000
    Failure Load Stage Pass
    Oxidation Stability 0.043
    TOST, ASTM D943-04a, hours 17/15/11
    Rust Test, ASTM D665 A&B
    Zinc, wt %
    Cleanliness Code, ISO 4460:1999 (2)
  • ISO Grade: 100
  • Licenses & Approvals

    Megaflow AW Ultra-Clean Hydraulic Oil meets the requirements of the following industry and OEM specifications: #Bosch Rexroth RE 90220, Type HLP #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP #Eaton-Vickers I-286-S, M-2950-S #German Steel Industry SEB 181222 #ISO 11158:1997, Family H (Hydraulic Systems), Type HM #Parker Hannifin (Denison) HF-0, HF-1, HF-2 #U.S. Steel 127

    Additional Details

    ISO Grade 100
    Specific Gravity @ 60°F 0.878
    Density, lbs/gal @ 60°F 7.31
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 252 (486)
    Pour Point, °C (°F) -32 (-26)
    Viscosity
    cSt @ 40°C 100
    cSt @ 100°C 11
    SUS @ 100°F 463
    SUS @ 210°F 62.8
    Viscosity Index 94
    Acid Number, ASTM D974, mg KOH/g 0.38
    Copper Corrosion, ASTM D130 1a
    Demulsibility, ASTM D1404, minutes to pass 10
    Dielectric Strength, ASTM D877, kV(2) 35
    Foam Test, ASTM D892, Seq. I, mL 0/0
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage 12
    Oxidation Stability
    TOST, ASTM D943-04a, hours >5,000
    Rust Test, ASTM D665 A&B Pass
    Zinc, wt % 0.043
    Cleanliness Code, ISO 4460:1999 (2) 17/15/11