Phillips 66® Moly Low Temp is a multipurpose, extreme pressure (EP), aluminum complex grease developed for use in automotive and industrial equipment operating at low ambient temperatures down to -30°F. It has good mobility at low temperatures plus a high dropping point for year-round use in arctic climates. Moly Low Temp is manufactured with low viscosity base oils and an aluminum complex soap thickener. It is compounded with select additives that provide.

EP and antiwear properties, good oxidation resistance, and rust and corrosion protection. It is fortified with 5% molybdenum disulfide (moly) for extra protection in equipment subject to heavy or shock loads. It has good shear stability and resistance to water washout. It is suitable for both winter and summer use in arctic climates.

You are currently viewing MOLY LOW TEMP GREASE

Features & Benefits

  • Suitable for year-round use in mobile equipment and industrial machinery operating in arctic climates
  • Good low temperature properties down to -30°F
  • Good EP and antiwear properties
  • Contains moly for extra protection under heavy or shock loads
  • Good oxidation resistance
  • Protects against rust and corrosion
  • Good shear stability
  • Good resistance to water washout


  • Mobile equipment and industrial machinery operating for prolonged periods at temperatures substantially below 32°F
  • Chassis parts, wheel bearings, spring shackles and kingpins on automotive and other mobile equipment operating in arctic climates
  • Chassis parts and wheel bearings on mobile equipment such as lift trucks operating in refrigeration plants, cold storage rooms and sharp-freeze rooms
  • Plain and rolling element bearings, slides and linkages on industrial equipment operating in cold rooms or at low ambient temperatures
  • Track roller bearings and chassis parts on tractors, coal haulers, snow removal equipment and other heavy equipment operating in cold climates

Technical Details

  • NLGI Grade: 1
  • Licenses & Approvals


    Additional Details

    NLGI Grade 1
    Thickener Type Aluminum Complex
    Texture Smooth
    Density, lbs/gal 7.46
    Color Black
    Dropping Point, °C (°F), ASTM D2265 260 (500)
    Molybdenum Disulfide, wt% 5
    Viscosity, Kinematic, ASTM D445
    cSt @ 40°C 25
    cSt @ 100°C 4.6
    Penetration, Worked (60 strokes), ASTM D217 310-340
    Oxidation Stability, 100 Hours, psi (kPa), ASTM D942 5 (34.5)
    Four-Ball Wear Scar, mm, ASTM D2266 0.35
    Four-Ball EP, Weld Load, Kgf, ASTM D2596 315
    Timken OK Load, lbs, ASTM D2509 45
    Corrosion Prevention, ASTM D1743 Pass
    Copper Corrosion, ASTM D4048 1b
Search this website Type then hit enter to search