POWERFLOW™ NZ HE-E HYDRAULIC OIL
HIGH-EFFICIENCY, HIGH VI, ZINC-FREE ANTIWEAR HYDRAULIC OIL FOR OFF-ROAD EQUIPMENT; EMULSIFIES WITH WATER
Phillips 66® Powerflow NZ HE-E Hydraulic Oil is a high-quality, high viscosity index, zinc-free antiwear hydraulic oil developed for use in mobile equipment operating over a wide temperature range and in wet environments. It is specially formulated to emulsify readily with water to maintain effective lubrication in the presence of water. It is particularly recommended for use in off-road equipment manufactured by Hitachi, John Deere and others, operating under conditions where an emulsifiable hydraulic oil is specified or preferred.
Links of Interest
Features & Benefits
- Emulsifies readily with water
- High VI to reduce internal oil leakage and increase hydraulic system efficiency by up to 6% compared to conventional single-grade hydraulic oils
- Excellent oxidation resistance and thermal stability
- Protects against rust and corrosion (reduced sludge and deposit formation)
- Excellent wear protection for hydraulic pumps and motors
- Improved product compatibility with traditional zinc-based products
- Good filterability
- Suitable for year-round use
Applications
- Off-road mobile construction and forestry equipment, such as backhoes, bulldozers, crawlers, excavators, skid-steer loaders and motor graders, where the manufacturer recommends an emulsifiable, zinc-free hydraulic oil
- Hitachi construction equipment with 5,000-hour service intervals
Technical Details
Licenses & Approvals:
Powerflow NZ HE-E Hydraulic Oil meets the requirements (except demulsibility) of the following industry and OEM specifications:- Bosch Rexroth RE 90220, Type HVLP
- DIN 51524 Part 3, Antiwear Hydraulic Oils, Type HVLP
- Parker Hannifin (Denison) HF-0, HF-1, HF-2
- Eaton-Vickers M-2950-S, I-286-S
- German Steel Industry SEB 181222
- Hitachi Advanced Hydraulic Oil (ISO VG 46)
- ISO 11158:1997, Family H (Hydraulic Systems), Type HV
- U.S. Steel 127
Additional Details:
| ISO Grade | 46 |
| Specific Gravity @ 60°F | 0.868 |
| Density, lbs/gal @ 60°F | 7.23 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 203 (397) |
| Pour Point, °C (°F) | -51 (-60) |
| Viscosity | |
| cSt @ 40°C | 46.0 |
| cSt @ 100°C | 8.6 |
| SUS @ 100°F | 214 |
| SUS @ 210°F | 54.5 |
| Viscosity Index | 168 |
| Copper Corrosion, ASTM D130 | 1b |
| Demulsibility, ASTM D1401, 30 minutes @ 54°C | |
| Emulsion, mL | 80 |
| Free Water, mL | 0 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 12 |
| Oxidation Stability, TOST, ASTM D943-04, hours | >7000 |
| Rust Test, ASTM D665 A&B | Pass |