POWERFLOW™ AW HYDRAULIC OIL
PREMIUM ANTI-WEAR HYDRAULIC OIL FOR PLASTIC INJECTION MOLDING MACHINES
Phillips 66® Powerflow AW Hydraulic Oil is a premium quality anti-wear hydraulic oil developed for use in a wide variety of industrial and mobile hydraulic systems operating under high-pressure, high-temperature conditions. It is formulated to provide enhanced wear protection and deposit control for severe service applications. It is particularly recommended for use in plastic injection molding machines where deposit control in the hydraulic circuit of the electro-pneumatic servo valves is essential for trouble-free operation.
Links of Interest
Features & Benefits
- Outstanding performance in plastic injection molding machines
- Excellent wear protection for hydraulic pumps and motors
- Excellent oxidation resistance and thermal stability
- Excellent deposit control
- Protects against rust and corrosion
- Excellent water-separating properties
- Good foam resistance
Applications
- Plastic injection molding machines
- Automated machine tools
- Elevators, hoists, presses and floor jacks
- Marine cargo winches and steering systems
- Mobile construction equipment
- Service station lifts
- Air tools and other pneumatic equipment lubricated through air line lubricators
- Chain drives
- Electric motor bearings
Technical Details
Licenses & Approvals:
Powerflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications:- Bosch Rexroth RE 90220, Type HLP
- DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP
- Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46 and 68)
- Eaton-Vickers I-286-S, M-2950-S, 35VQ25A antiwear performance (brochure 03-401-2010 Rev 1 ISO 32, 46 and 68)
- Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved)
- German Steel Industry SEB 181222
- ISO 11158:1997, Family H (Hydraulic Systems), Type HM
- U.S. Steel 127
Additional Details:
| ISO Grade | 32 |
| Specific Gravity @ 60°F | 0.863 |
| Density, lbs/gal @ 60°F | 7.18 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 216 (421) |
| Pour Point, °C (°F) | -37 (-35) |
| Viscosity | |
| cSt @ 40°C | 32 |
| cSt @ 100°C | 5.4 |
| SUS @ 100°F | 150 |
| SUS @ 210°F | 44 |
| Viscosity Index | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.6 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >7500 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.066 |
Licenses & Approvals:
Powerflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications:- Bosch Rexroth RE 90220, Type HLP
- DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP
- Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46 and 68)
- Eaton-Vickers I-286-S, M-2950-S, 35VQ25A antiwear performance (brochure 03-401-2010 Rev 1 ISO 32, 46 and 68)
- Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved)
- German Steel Industry SEB 181222
- ISO 11158:1997, Family H (Hydraulic Systems), Type HM
- U.S. Steel 127
Additional Details:
| ISO Grade | 46 |
| Specific Gravity @ 60°F | 0.869 |
| Density, lbs/gal @ 60°F | 7.24 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 221 (430) |
| Pour Point, °C (°F) | -36 (-33) |
| Viscosity | |
| cSt @ 40°C | 46 |
| cSt @ 100°C | 6.8 |
| SUS @ 100°F | 214 |
| SUS @ 210°F | 48.5 |
| Viscosity Index | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.6 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >7500 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.066 |
Licenses & Approvals:
Powerflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications:- Bosch Rexroth RE 90220, Type HLP
- DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP
- Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46 and 68)
- Eaton-Vickers I-286-S, M-2950-S, 35VQ25A antiwear performance (brochure 03-401-2010 Rev 1 ISO 32, 46 and 68)
- Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved)
- German Steel Industry SEB 181222
- ISO 11158:1997, Family H (Hydraulic Systems), Type HM
- U.S. Steel 127
Additional Details:
| ISO Grade | 68 |
| Specific Gravity @ 60°F | 0.874 |
| Density, lbs/gal @ 60°F | 7.28 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 238 (460) |
| Pour Point, °C (°F) | -36 (-33) |
| Viscosity | |
| cSt @ 40°C | 68 |
| cSt @ 100°C | 8.7 |
| SUS @ 100°F | 315 |
| SUS @ 210°F | 54.9 |
| Viscosity Index | 99 |
| Acid Number, ASTM D974, mg KOH/g | 0.6 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >7500 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.066 |
Licenses & Approvals:
Powerflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications:- Bosch Rexroth RE 90220, Type HLP
- DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP
- Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46 and 68)
- Eaton-Vickers I-286-S, M-2950-S, 35VQ25A antiwear performance (brochure 03-401-2010 Rev 1 ISO 32, 46 and 68)
- Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved)
- German Steel Industry SEB 181222
- ISO 11158:1997, Family H (Hydraulic Systems), Type HM
- U.S. Steel 127
Additional Details:
| ISO Grade | 100 |
| Specific Gravity @ 60°F | 0.878 |
| Density, lbs/gal @ 60°F | 7.31 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 254 (489) |
| Pour Point, °C (°F) | -29 (-20) |
| Viscosity | |
| cSt @ 40°C | 100 |
| cSt @ 100°C | 11.3 |
| SUS @ 100°F | 463 |
| SUS @ 210°F | 63.9 |
| Viscosity Index | 99 |
| Acid Number, ASTM D974, mg KOH/g | 0.6 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 10 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 12 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >7500 |
| Rust Test, ASTM D665 A&B | Pass |
| Zinc, wt % | 0.066 |