POWERFLOW™ HE HYDRAULIC OIL

PREMIUM HIGH- EFFICIENCY, HIGH VI ANTI-WEAR HYDRAULIC OIL FOR WIDE TEMPERATURE RANGES

Phillips 66® Powerflow HE Hydraulic Oil is a premium quality, high viscosity index anti-wear hydraulic oil developed for use in industrial and mobile equipment operating in cold climates or in locations subject to wide variations in ambient temperatures. It meets the performance requirements of all major hydraulic pump manufacturers, and is recommended for use in all types of high-pressure, high-speed hydraulic pumps. It is particularly recommended for year-round use in mobile equipment such as bucket trucks, cranes and aerial lifts.

POWERFLOW™ HE HYDRAULIC OIL

Features & Benefits

  • High VI to reduce internal oil leakage and increase hydraulic system efficiency by up to 6% compared to conventional single-grade hydraulic fluid
  • Excellent service over a wide temperature range
  • Excellent wear protection for hydraulic pumps and motors
  • Excellent oxidation resistance and thermal stability
  • Protects against rust and corrosion
  • Excellent water-separating properties
  • Good foam resistance
  • Excellent low-temperature properties for cold start-ups
  • High dielectric strength for use in electrical service bucket trucks (cherry pickers) (1)

    (1) Note: In order to maintain its high dielectric strength for use as electrical insulating oil, the oil must be kept clean and dry. Contamination with water will significantly decrease the dielectric strength.

Applications

  • Industrial and mobile equipment operating in cold weather or in locations subject to wide temperature fluctuations
  • Bucket trucks (cherry pickers) used for servicing electrical power lines or for tree-trimming
  • Hydraulic hoists and service station lifts
  • Marine cargo winches and steering systems
  • Off-road construction, mining and marine equipment
  • Chain drives
  • Electric motor bearings

Technical Details

  • ISO Grade: 32
  • Licenses & Approvals

    Powerflow HE Hydraulic Oil meets the requirements of the following industry and OEM specifications:#DIN 51524 Part 3, Antiwear Hydraulic Oils, Type HVLP#Eaton-Vickers M-2950-S, I-286-S#ISO 11158:1997, Family H (Hydraulic Systems), Type HV#Parker Hannifin (Denison) HF-0, HF-1, HF-2

    Additional Details

    ISO Grade 32
    Specific Gravity @ 60°F 0.862
    Density, lbs/gal @ 60°F 7.18
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 204 (399)
    Pour Point, °C (°F) -51 (-60)
    Viscosity
    cSt @ 40°C 32
    cSt @ 100°C 6.7
    SUS @ 100°F 150
    SUS @ 210°F 48.2
    Viscosity Index 173
    Acid Number, ASTM D974, mg KOH/g 0.6
    Copper Corrosion, ASTM D130 1a
    Demulsibility, ASTM D1404, minutes to pass 10
    Dielectric Strength, ASTM D877, kV(2) 35
    Foam Test, ASTM D892, Seq. I, mL 0/0
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage -
    Oxidation Stability
    TOST, ASTM D943-04a, hours >7,000
    Rust Test, ASTM D665 A&B Pass
    Zinc, wt % 0.066
  • ISO Grade: 46
  • Licenses & Approvals

    Powerflow HE Hydraulic Oil meets the requirements of the following industry and OEM specifications:#DIN 51524 Part 3, Antiwear Hydraulic Oils, Type HVLP#Eaton-Vickers M-2950-S, I-286-S#ISO 11158:1997, Family H (Hydraulic Systems), Type HV#Parker Hannifin (Denison) HF-0, HF-1, HF-2

    Additional Details

    ISO Grade 46
    Specific Gravity @ 60°F 0.867
    Density, lbs/gal @ 60°F 7.22
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 216 (421)
    Pour Point, °C (°F) -43 (-45)
    Viscosity
    cSt @ 40°C 46
    cSt @ 100°C 8.6
    SUS @ 100°F 214
    SUS @ 210°F 54.5
    Viscosity Index 171
    Acid Number, ASTM D974, mg KOH/g 0.6
    Copper Corrosion, ASTM D130 1a
    Demulsibility, ASTM D1404, minutes to pass 10
    Dielectric Strength, ASTM D877, kV(2) 35
    Foam Test, ASTM D892, Seq. I, mL 0/0
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage 12
    Oxidation Stability
    TOST, ASTM D943-04a, hours >7,000
    Rust Test, ASTM D665 A&B Pass
    Zinc, wt % 0.066
  • ISO Grade: 68
  • Licenses & Approvals

    Powerflow HE Hydraulic Oil meets the requirements of the following industry and OEM specifications:#DIN 51524 Part 3, Antiwear Hydraulic Oils, Type HVLP#Eaton-Vickers M-2950-S, I-286-S#ISO 11158:1997, Family H (Hydraulic Systems), Type HV#Parker Hannifin (Denison) HF-0, HF-1, HF-2

    Additional Details

    ISO Grade 68
    Specific Gravity @ 60°F 0.87
    Density, lbs/gal @ 60°F 7.24
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 227 (441)
    Pour Point, °C (°F) -36 (-33)
    Viscosity
    cSt @ 40°C 68
    cSt @ 100°C 11.6
    SUS @ 100°F 315
    SUS @ 210°F 65
    Viscosity Index 166
    Acid Number, ASTM D974, mg KOH/g 0.6
    Copper Corrosion, ASTM D130 1a
    Demulsibility, ASTM D1404, minutes to pass 10
    Dielectric Strength, ASTM D877, kV(2) 35
    Foam Test, ASTM D892, Seq. I, mL 0/0
    FZG Scuffing Test, ASTM D5182
    Failure Load Stage 12
    Oxidation Stability
    TOST, ASTM D943-04a, hours >7,000
    Rust Test, ASTM D665 A&B Pass
    Zinc, wt % 0.066