PREMIUM ROTARY AIR COMPRESSOR OIL

PREMIUMSYNTHETIC BLEND LUBRICANT

Phillips 66® Premium Rotary Air Compressor Oil is a premium quality, part-synthetic lubricant developed for use in rotary air compressors operating under moderate to severe service conditions. The part-synthetic formulation provides enhanced thermal and oxidative stability at high temperatures to minimize the formation of sludge and varnish.

PREMIUM ROTARY AIR COMPRESSOR OIL

Features & Benefits

  • Part-synthetic formulation for enhanced performance benefits
  • Excellent resistance to thermal breakdown at high temperatures
  • Excellent oxidation resistance to minimize sludge and varnish formation
  • Good wear protection
  • Natural detergency
  • Protects against rust and corrosion
  • Good low-temperature properties
  • Good water-separating properties
  • Good foam resistance
  • Low carbon-forming tendency

Applications

  • Oil-flooded rotary screw, rotary lobe, and rotary vane air compressors
  • Circulating systems requiring a part-synthetic lubricant
  • Industrial equipment operating over a wide temperature range where an inhibited mineral oil is recommended
  • Industrial equipment where operating conditions are too severe for conventional mineral oil-based R&O-inhibited circulating oils

Technical Details

  • ISO Grade: 46
  • Licenses & Approvals

    Premium Rotary Air Compressor Oil meets the requirements of the following industry specifications:#DIN 51506, Air Compressor Lubricant Standard, Grade VDL#DIN 51517 Part 2, Lubricating Oils, Type CL#DIN 51517 Part 3, Lubricating Oils, Type CLP

    Additional Details

    ISO Grade 46
    Specific Gravity @ 60°F 0.875
    Density, lbs/gal @ 60°F 7.29
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 238 (460)
    Pour Point, °C (°F) -36 (-33)
    Viscosity
    cSt @ 40°C 46
    cSt @ 100°C 6.7
    SUS @ 100°F 238
    SUS @ 210°F 48.7
    Viscosity Index 97
    Acid Number, ASTM D974, mg KOH/g 0.17
    Demulsibility, ASTM D1401, minutes to pass 15
    Foam Test, ASTM D892, Seq. I, mL 15/0
    Oxidation Stability, RPVOT, ASTM D2272, minutes 2100
    Rust Test, ASTM D665 A&B Pass