SYNCON® AW HYDRAULIC FLUID

SYNTHETIC ANTI-WEAR HYDRAULIC FLUID

Phillips 66® Syncon AW Hydraulic Fluid is a premium quality, synthetic anti-wear hydraulic fluid developed for use in industrial and mobile equipment operating at extreme temperatures. It is particularly recommended for use in applications where operating conditions may be unfavorable or too severe for conventional mineral oil-based hydraulic oils.

You are currently viewing SYNCON® AW HYDRAULIC FLUID

Features & Benefits

  • Outstanding oxidation resistance and thermal stability at high temperatures
  • Outstanding pumpability at low temperatures
  • Excellent wear protection for hydraulic pumps and motors
  • Protects against rust and corrosion
  • Separates rapidly from water
  • Good foam resistance
  • High dielectric strength
  • Compatible with conventional mineral oils and commonly used seals

Applications

  • Industrial and mobile equipment operating under extreme-temperature conditions
  • Automated machine tools
  • Bucket trucks (cherry pickers) used for servicing electrical power lines or for tree trimming
  • Hydraulic hoists and service station lifts
  • Mobile construction equipment
  • Chain drives
  • Electric motor bearings

Technical Details

  • ISO Grade: 22
  • Licenses & Approvals

    Syncon AW Hydraulic Fluid meets the requirements of the following industry specifications:#DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP#ISO 11158:1997, Family H (Hydraulic Systems), Type HM#U. S. Steel 127

    Additional Details

    ISO Grade 22
    Specific Gravity @ 60°F 0.821
    Density, lbs/gal @ 60°F 6.84
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 218 (424)
    Pour Point, °C (°F) -66 (-87)
    Viscosity
    cSt @ 40°C 22
    cSt @ 100°C 4.6
    SUS @ 100°F 115
    SUS @ 210°F 41.7
    Viscosity Index 127
    Acid Number, ASTM D974, mg KOH/g 0.17
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1a
    Demulsibility, ASTM D1401, minutes to pass 10
    Dielectric Strength, ASTM D877, kV(2) 35
    Foam Test, ASTM D892 Pass
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.47
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 11
    Oxidation Stability, RPVOT, ASTM D2272, minutes 2000
    Rust Test, ASTM D665 A&B Pass
  • ISO Grade: 32
  • Licenses & Approvals

    Syncon AW Hydraulic Fluid meets the requirements of the following industry specifications:#DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP#ISO 11158:1997, Family H (Hydraulic Systems), Type HM#U. S. Steel 127

    Additional Details

    ISO Grade 32
    Specific Gravity @ 60°F 0.853
    Density, lbs/gal @ 60°F 7.1
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 240 (464)
    Pour Point, °C (°F) -60 (-76)
    Viscosity
    cSt @ 40°C 32
    cSt @ 100°C 5.8
    SUS @ 100°F 164
    SUS @ 210°F 45.7
    Viscosity Index 125
    Acid Number, ASTM D974, mg KOH/g 0.17
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1a
    Demulsibility, ASTM D1401, minutes to pass 10
    Dielectric Strength, ASTM D877, kV(2) 35
    Foam Test, ASTM D892 Pass
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.47
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12
    Oxidation Stability, RPVOT, ASTM D2272, minutes 2000
    Rust Test, ASTM D665 A&B Pass
Search this website Type then hit enter to search