SYNCON® R&O OIL (ISO VG 100-680)

SYNTHETIC PAO-BASED, RUST & OXIDATION-INHIBITED CIRCULATING OIL FOR GEARS & BEARINGS; ISO VG 100-680

Phillips 66® Syncon R&O Oil (ISO VG 100-680) is a premium quality, synthetic, rust and oxidation (R&O)-inhibited circulating oil developed for use in circulating systems, lightly loaded enclosed gear drives, and other industrial equipment operating under severe-service conditions or at extreme temperatures. It is particularly recommended for use in applications where operating conditions may be unfavorable or too severe for conventional mineral oil-based circulating oils.

SYNCON® R&O OIL (ISO VG 100-680)

Features & Benefits

  • Outstanding resistance to thermal breakdown at high temperatures
  • Outstanding oxidation resistance to minimize deposit and varnish formation
  • Protects against wear
  • Protects against rust and corrosion
  • Good water-separating properties
  • Good foam resistance
  • Excellent low-temperature fluidity
  • Extended service intervals compared with mineral oil-based lubricants
  • Compatible with mineral oil-based lubricants(1)

    (1)Note: For optimum performance, the mineral oil lubricant should be drained before using Syncon R&O Oil. Mixing the two products can reduce the effectiveness and performance advantages normally gained by using Syncon R&O Oil.

Applications

  • Plain and rolling-element bearings operating at very high or very low temperatures, and sealed-for-life bearings
  • Lightly to moderately loaded enclosed industrial gear drives that do not require a compounded or extreme-pressure (EP) gear lubricant
  • Circulating systems of paper machine dryer sections and calender stacks
  • Industrial blowers
  • Industrial worm gear drives with bronze-on-steel gears
  • Reciprocating air compressors where the manufacturer specifies a PAO-based lubricant (ISO VG 100 or 150, typically)
  • Lubrication of the upper cylinders of gas compressors handling natural gas or process gas (ISO VG 150 or 220, typically)
  • Industrial equipment operating over a wide temperature range where an inhibited mineral oil is recommended

    Note: For information on compatibility with seals, paints and plastics, please call our Technical Support.

Technical Details

  • ISO Grade: 100
  • Licenses & Approvals

    Syncon R&O Oil meets the requirements of the following industry and OEM specifications: #AGMA 9005-F16 Inhibited, R&O, Lubricants

    Additional Details

    ISO Grade 100
    AGMA Grade (obsolete) 3
    AGMA Classification R&O
    Specific Gravity @ 60°F 0.861
    Density, lbs/gal @ 60°F 7.17
    Color, ASTM D1500 1
    Flash Point (COC), °C (°F) 266 (511)
    Pour Point, °C (°F) -43 (-45)
    Viscosity
    cSt @ 40°C 99.1
    cSt @ 100°C 14.4
    SUS @ 100°F 508
    SUS @ 210°F 77
    Viscosity Index 150
    Acid Number, ASTM D974, mg KOH/g 1.5
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1a
    Demulsibility, ASTM D1401, minutes to pass 15
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.4
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12
  • ISO Grade: 150
  • Licenses & Approvals

    Syncon R&O Oil meets the requirements of the following industry and OEM specifications: #AGMA 9005-F16 Inhibited, R&O, Lubricants

    Additional Details

    ISO Grade 150
    AGMA Grade (obsolete) 4
    AGMA Classification R&O
    Specific Gravity @ 60°F 0.866
    Density, lbs/gal @ 60°F 7.21
    Color, ASTM D1500 1
    Flash Point (COC), °C (°F) 243 (469)
    Pour Point, °C (°F) -44 (-47)
    Viscosity
    cSt @ 40°C 149
    cSt @ 100°C 19.8
    SUS @ 100°F 766
    SUS @ 210°F 99.9
    Viscosity Index 153
    Acid Number, ASTM D974, mg KOH/g 1.5
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1a
    Demulsibility, ASTM D1401, minutes to pass 15
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.4
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12
  • ISO Grade: 220
  • Licenses & Approvals

    Syncon R&O Oil meets the requirements of the following industry and OEM specifications: #AGMA 9005-F16 Inhibited, R&O, Lubricants

    Additional Details

    ISO Grade 220
    AGMA Grade (obsolete) 5
    AGMA Classification R&O
    Specific Gravity @ 60°F 0.871
    Density, lbs/gal @ 60°F 7.25
    Color, ASTM D1500 1
    Flash Point (COC), °C (°F) 266 (511)
    Pour Point, °C (°F) -45 (-49)
    Viscosity
    cSt @ 40°C 231
    cSt @ 100°C 27.6
    SUS @ 100°F 1194
    SUS @ 210°F 135
    Viscosity Index 155
    Acid Number, ASTM D974, mg KOH/g 1.5
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1a
    Demulsibility, ASTM D1401, minutes to pass 20
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.4
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12
  • ISO Grade: 320
  • Licenses & Approvals

    Syncon R&O Oil meets the requirements of the following industry and OEM specifications: #AGMA 9005-F16 Inhibited, R&O, Lubricants

    Additional Details

    ISO Grade 320
    AGMA Grade (obsolete) 6
    AGMA Classification R&O
    Specific Gravity @ 60°F 0.875
    Density, lbs/gal @ 60°F 7.29
    Color, ASTM D1500 1
    Flash Point (COC), °C (°F) 255 (491)
    Pour Point, °C (°F) -48 (-54)
    Viscosity
    cSt @ 40°C 341
    cSt @ 100°C 37.2
    SUS @ 100°F 1769
    SUS @ 210°F 180
    Viscosity Index 157
    Acid Number, ASTM D974, mg KOH/g 1.5
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1a
    Demulsibility, ASTM D1401, minutes to pass 20
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.4
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12
  • ISO Grade: 460
  • Licenses & Approvals

    Syncon R&O Oil meets the requirements of the following industry and OEM specifications: #AGMA 9005-F16 Inhibited, R&O, Lubricants

    Additional Details

    ISO Grade 460
    AGMA Grade (obsolete) 7
    AGMA Classification R&O
    Specific Gravity @ 60°F 0.882
    Density, lbs/gal @ 60°F 7.34
    Color, ASTM D1500 1
    Flash Point (COC), °C (°F) 243 (469)
    Pour Point, °C (°F) -48 (-54)
    Viscosity
    cSt @ 40°C 480
    cSt @ 100°C 48.3
    SUS @ 100°F 2500
    SUS @ 210°F 233
    Viscosity Index 159
    Acid Number, ASTM D974, mg KOH/g 1.5
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1a
    Demulsibility, ASTM D1401, minutes to pass 25
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.4
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12
  • ISO Grade: 680
  • Licenses & Approvals

    Syncon R&O Oil meets the requirements of the following industry and OEM specifications: #AGMA 9005-F16 Inhibited, R&O, Lubricants

    Additional Details

    ISO Grade 680
    AGMA Grade (obsolete) 8
    AGMA Classification R&O
    Specific Gravity @ 60°F 0.882
    Density, lbs/gal @ 60°F 7.34
    Color, ASTM D1500 1
    Flash Point (COC), °C (°F) 266 (511)
    Pour Point, °C (°F) -43 (-45)
    Viscosity
    cSt @ 40°C 728
    cSt @ 100°C 67.5
    SUS @ 100°F 3804
    SUS @ 210°F 326
    Viscosity Index 166
    Acid Number, ASTM D974, mg KOH/g 1.5
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1a
    Demulsibility, ASTM D1401, minutes to pass 25
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.4
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12