SYNCON® TURBINE OIL

SYNTHETIC PAO-BASED TURBINE OIL

Phillips 66® Syncon Turbine Oil is a premium quality, synthetic lubricant developed for use in land-based gas turbines operating over a wide temperature range, where the manufacturer calls for a synthesized hydrocarbon (SHC) or PAO based turbine oil.

You are currently viewing SYNCON® TURBINE OIL

Features & Benefits

  • Outstanding oxidation resistance and thermal stability at high temperatures
  • Excellent low-temperature fluidity
  • High viscosity index and very low pour point for use over a wide temperature range
  • Low volatility for lower oil consumption and less makeup oil
  • Protects against wear
  • Protects against rust and corrosion
  • Good foam resistance
  • Extended service intervals compared with conventional mineral oil-based lubricants

    Note: For more information on compatibility with seals, paints and plastics, please call our Technical Support Hotline.

Applications

  • Land-based gas turbines

Technical Details

  • ISO Grade: 32
  • Licenses & Approvals

    Syncon Turbine Oil meets the requirements of the following OEM specification:#Solar Turbines ES 9-224, Revision AA, Class I (Synthesized Hydrocarbon) Turbine Oil(1)

    (1)In order to meet the ES 9-224 cleanliness specification, the fluid may need to be filtered prior to reservoir introduction

    Additional Details

    ISO Grade 32
    Specific Gravity @ 60°F 0.841
    Density, lbs/gal @ 60°F 7
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 254 (489)
    Pour Point, °C (°F) -57 (-71)
    Viscosity
    cSt @ 40°C 32
    cSt @ 100°C 6
    SUS @ 100°F 164
    SUS @ 210°F 46.3
    Viscosity Index 136
    Acid Number, ASTM D974, mg KOH/g 0.36
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1a
    Demulsibility, ASTM D1401, minutes to pass 10
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.4
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 8
    Oxidation Stability, RPVOT, ASTM D2272, minutes 1600
    Rust Test, ASTM D665 A&B Pass
  • ISO Grade: 46
  • Licenses & Approvals

    Syncon Turbine Oil meets the requirements of the following OEM specification:#Solar Turbines ES 9-224, Revision AA, Class I (Synthesized Hydrocarbon) Turbine Oil(1)

    (1)In order to meet the ES 9-224 cleanliness specification, the fluid may need to be filtered prior to reservoir introduction

    Additional Details

    ISO Grade 46
    Specific Gravity @ 60°F 0.846
    Density, lbs/gal @ 60°F 7.04
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 260 (500)
    Pour Point, °C (°F) -42 (-44)
    Viscosity
    cSt @ 40°C 42.4
    cSt @ 100°C 7.5
    SUS @ 100°F 197.7
    SUS @ 210°F 50.8
    Viscosity Index 145
    Acid Number, ASTM D974, mg KOH/g 0.42
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1a
    Demulsibility, ASTM D1401, minutes to pass 10
    Foam Test, ASTM D892, Seq. I, mL 0/0
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.4
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 8
    Oxidation Stability, RPVOT, ASTM D2272, minutes 1600
    Rust Test, ASTM D665 A&B Pass
Search this website Type then hit enter to search