ULTRA-CLEAN MULTIPURPOSE R&O OIL
RUST & OXIDATION-INHIBITED, ANTI-WEAR CIRCULATING OIL
Phillips 66® Ultra-Clean Multipurpose R&O Oil is a rust and oxidation (R&O)- inhibited, anti-wear circulating oil specially developed for use in industrial equipment that requires an ultra-clean fluid. It provides the same performance features as Multipurpose R&O Oil plus the added benefit of fine filtration to a typical ISO Cleanliness Code of 17/15/11, for use in circulating systems with tight tolerances where particle contamination can cause operational problems.
Links of Interest
Features & Benefits
- Good oxidation resistance to minimize sludge and varnish formation
- Mild wear protection
- Protects against rust and corrosion
- Excellent water-separating properties
- Low carbon-forming tendency for use in centrifugal air compressors
- Good foam resistance
- Meets ISO Cleanliness Code rating of 17/15/11
Applications
- Circulating systems where fluid cleanliness is critical
- Centrifugal air compressors
- Steam turbines and hydroelectric turbines, both direct-drive and those with gear drives
- Lightly loaded enclosed industrial gear drives where the OEM specifies a R&O-type oil (ISO VG 68, 100)
- Electric motor bearings
- Vacuum pumps and machine tools
Technical Details
Licenses & Approvals:
Ultra-Clean Multipurpose R&O oil meets the requirements of the following industry and OEM specifications:- ABB G12106
- Alstom Power HTGD 90 117 for geared turbines
- ASTM D4304 Type I Turbine Oil
- British Standard 489
- Denison Hydraulics HF-1
- DIN 51517 Part 2, Lubricating Oils, Type CL
- DIN 51524 Part 1, Hydraulic Oils, Type HL
- General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143b (obsolete)
- Solar Turbines ES 9-224 Class II Turbine Oil
- U.S. Military MIL-L-17672D
- U.S. Steel 126
Additional Details:
| ISO Grade | 32 |
| AGMA Grade | 0 |
| Specific Gravity @ 60°F | 0.862 |
| Density, lbs/gal @ 60°F | 7.18 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 232 (450) |
| Pour Point, °C (°F) | -40 (-40) |
| Viscosity | |
| cSt @ 40°C | 32.5 |
| cSt @ 100°C | 5.4 |
| SUS @ 100°F | 168 |
| SUS @ 210°F | 44.4 |
| Viscosity Index | 99 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172, Scar Diameter, mm | 0.54 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 750 |
| Rust Test, ASTM D665 A&B | Pass |
| Cleanliness Code, ISO 4406:1999 | 17/15/11 |
Licenses & Approvals:
Ultra-Clean Multipurpose R&O oil meets the requirements of the following industry and OEM specifications:- ABB G12106
- Alstom Power HTGD 90 117 for geared turbines
- ASTM D4304 Type I Turbine Oil
- British Standard 489
- Denison Hydraulics HF-1
- DIN 51517 Part 2, Lubricating Oils, Type CL
- DIN 51524 Part 1, Hydraulic Oils, Type HL
- General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143b (obsolete)
- Solar Turbines ES 9-224 Class II Turbine Oil
- U.S. Military MIL-L-17672D
- U.S. Steel 126
Additional Details:
| ISO Grade | 68 |
| AGMA Grade | 2 |
| Specific Gravity @ 60°F | 0.873 |
| Density, lbs/gal @ 60°F | 7.27 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 243 (469) |
| Pour Point, °C (°F) | -34 (-30) |
| Viscosity | |
| cSt @ 40°C | 68.2 |
| cSt @ 100°C | 8.8 |
| SUS @ 100°F | 353 |
| SUS @ 210°F | 55.9 |
| Viscosity Index | 101 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172, Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 750 |
| Rust Test, ASTM D665 A&B | Pass |
| Cleanliness Code, ISO 4406:1999 | 17/15/11 |
Licenses & Approvals:
Ultra-Clean Multipurpose R&O oil meets the requirements of the following industry and OEM specifications:- ABB G12106
- Alstom Power HTGD 90 117 for geared turbines
- ASTM D4304 Type I Turbine Oil
- British Standard 489
- Denison Hydraulics HF-1
- DIN 51517 Part 2, Lubricating Oils, Type CL
- DIN 51524 Part 1, Hydraulic Oils, Type HL
- General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143b (obsolete)
- Solar Turbines ES 9-224 Class II Turbine Oil
- U.S. Military MIL-L-17672D
- U.S. Steel 126
Additional Details:
| ISO Grade | 100 |
| AGMA Grade | 3 |
| Specific Gravity @ 60°F | 0.877 |
| Density, lbs/gal @ 60°F | 7.3 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 268 (514) |
| Pour Point, °C (°F) | -34 (-30) |
| Viscosity | |
| cSt @ 40°C | 101 |
| cSt @ 100°C | 11.3 |
| SUS @ 100°F | 527 |
| SUS @ 210°F | 65 |
| Viscosity Index | 98 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172, Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 750 |
| Rust Test, ASTM D665 A&B | Pass |
| Cleanliness Code, ISO 4406:1999 | 17/15/11 |