Phillips 66® Ultra-Clean Turbine Oil is a very high quality, rust and oxidation (R&O)-inhibited circulating oil developed for use in industrial gas turbines and steam turbines, and other industrial applications. It provides the same performance features as Phillips 66 Turbine Oil with the added benefit of filtration to a typical ISO Cleanliness Code of 18/16/13, for use in circulating systems with tight tolerances.
ULTRA-CLEAN TURBINE OIL
LONG-LIFE, RUST & OXIDATION-INHIBITED CIRCULATING OIL
Links of Interest
Features & Benefits
- Excellent oxidation resistance and thermal stability for long service life
- Protects against sludge and varnish formation
- Protects against rust and corrosion
- Excellent water-separating properties
- Low carbon-forming tendency for use in air compressors
- Good foam resistance
- Meets ISO Cleanliness Code rating of 18/16/13
Applications
- Direct-drive steam turbines and hydroelectric turbines
- Air tools and other pneumatic equipment lubricated through air line lubricators
- Centrifugal and rotary air compressors
- Lightly loaded enclosed gear drives where the OEM specifies a R&O type oil (ISO VG 68)
- Electric motor bearings, fan bearings, and blower bearings
- Vacuum pumps, deep-well water pumps, and machine tools
Technical Details
- ISO Grade: 32
- ISO Grade: 46
- ISO Grade: 68
- ISO Grade: 32
- ISO Grade: 46
- ISO Grade: 68
Licenses & Approvals
Ultra-Clean Turbine Oil meets the requirements of the following industry and OEM specifications:#ABB G12106#Alstom Power HTGD 90 117, for turbines without gear drives#Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46)#ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils#ASTM D4304-06a, Type I Turbine Oil#British Standard 489#China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)#Denison Hydraulics HF-1#DIN 51515 Part 1, Lubricating Oils, Type L-TD#DIN 51517 Part 2, Lubricating Oils, Type CL#DIN 51524 Part 1, Hydraulic Oils, Type HL#General Electric GEK 46506e, GEK 32568k, GEK 27070 (obsolete), GEK 28143b (obsolete)#Siemens Power Generation TLV 9013 04, TLV 9013 05#U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)#U.S. Steel 126
Additional Details
| ISO Grade | 32 |
| Specific Gravity @ 60°F | 0.862 |
| Density, lbs/gal @ 60°F | 7.18 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F), ASTM D92 | 220 (428) |
| Pour Point, °C (°F), ASTM D97 | -40 (-40) |
| Viscosity, ASTM D445 | |
| cSt @ 40°C | 31.8 |
| cSt @ 100°C | 5.4 |
| Viscosity Index, ASTM D2270 | 106 |
| Acid Number, ASTM D974, mg KOH/g | 0.04 |
| Air Release, ASTM D3427, minutes | 3.0 |
| Copper Corrosion, ASTM D130, 3 hrs @ 100°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >10,000 |
| RPVOT, ASTM D2272, minutes | >1,500 |
| Rust Test, ASTM D665 A&B | Pass |
| Cleanliness Code, ISO 4406:1999 | 18/16/13 |
Licenses & Approvals
Ultra-Clean Turbine Oil meets the requirements of the following industry and OEM specifications:#ABB G12106#Alstom Power HTGD 90 117, for turbines without gear drives#Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46)#ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils#ASTM D4304-06a, Type I Turbine Oil#British Standard 489#China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)#Denison Hydraulics HF-1#DIN 51515 Part 1, Lubricating Oils, Type L-TD#DIN 51517 Part 2, Lubricating Oils, Type CL#DIN 51524 Part 1, Hydraulic Oils, Type HL#General Electric GEK 46506e, GEK 32568k, GEK 27070 (obsolete), GEK 28143b (obsolete)#Siemens Power Generation TLV 9013 04, TLV 9013 05#U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)#U.S. Steel 126
Additional Details
| ISO Grade | 46 |
| Specific Gravity @ 60°F | 0.868 |
| Density, lbs/gal @ 60°F | 7.23 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F), ASTM D92 | 232 (450) |
| Pour Point, °C (°F), ASTM D97 | -40 (-40) |
| Viscosity, D445 | |
| cSt @ 40°C | 46.0 |
| cSt @ 100°C | 6.7 |
| Viscosity Index, D2270 | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.04 |
| Air Release, ASTM D3427, minutes | 3.0 |
| Copper Corrosion, ASTM D130, 3 hrs @ 100°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >10,000 |
| RPVOT, ASTM D2272, minutes | >1,500 |
| Rust Test, ASTM D665 A&B | Pass |
| Cleanliness Code, ISO 4406:1999 | 18/16/13 |
Licenses & Approvals
Ultra-Clean Turbine Oil meets the requirements of the following industry and OEM specifications:#ABB G12106#Alstom Power HTGD 90 117, for turbines without gear drives#Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46)#ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils#ASTM D4304-06a, Type I Turbine Oil#British Standard 489#China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)#Denison Hydraulics HF-1#DIN 51515 Part 1, Lubricating Oils, Type L-TD#DIN 51517 Part 2, Lubricating Oils, Type CL#DIN 51524 Part 1, Hydraulic Oils, Type HL#General Electric GEK 46506e, GEK 32568k, GEK 27070 (obsolete), GEK 28143b (obsolete)#Siemens Power Generation TLV 9013 04, TLV 9013 05#U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)#U.S. Steel 126
Additional Details
| ISO Grade | 68 |
| Specific Gravity @ 60°F | 0.871 |
| Density, lbs/gal @ 60°F | 7.25 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F), ASTM D92 | 243 (469) |
| Pour Point, °C (°F), ASTM D97 | -34 (-29) |
| Viscosity, ASTM D445 | |
| cSt @ 40°C | 68.0 |
| cSt @ 100°C | 8.8 |
| Viscosity Index, ASTM D2270 | 100 |
| Acid Number, ASTM D974, mg KOH/g | 0.04 |
| Air Release, ASTM D3427, minutes | 4.0 |
| Copper Corrosion, ASTM D130 3 hrs @ 100°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >10,000 |
| RPVOT, ASTM D2272, minutes | >1,000 |
| Rust Test, ASTM D665 A&B | Pass |
| Cleanliness Code, ISO 4406:1999 | 18/16/13 |
