UNIGUIDE II
PREMIUM ASHLESS SAW GUIDE OIL
Phillips 66® Uniguide II is a premium quality oil specially developed to provide optimum lubrication of saw guides and saw blades in sawmills. It is particularly recommended for the lubrication of arbor bearings and saw guide systems that utilize “thin kerf” technology in cutting lumber.
Links of Interest
Features & Benefits
- Good metal-wetting ability
- Homogenizes into fine droplets in the presence of water
- Extreme-pressure properties for wear protection
- Resists sling-off
- Excellent filterability
- Protects against rust and corrosion
- Ashless formulation; does not contain heavy metals or chlorine
- Environmentally friendly and non-toxic to both freshwater and saltwater organisms
Applications
- Saw guides and blades
- Arbor bearings
- Saw system ways and gears
Technical Details
Licenses & Approvals:
Uniguide II is recommended for use in saw guide systems from all leading manufacturers, including:- Coe Newnes/McGehee
- Salem
- USNR (Schurman, Ukiah)
Additional Details:
| ISO Grade | 32 |
| Specific Gravity @ 60°F | 0.861 |
| Density, lbs/gal @ 60°F | 7.17 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 216 (420) |
| Pour Point, °C (°F) | -24 (-11) |
| Viscosity | |
| cSt @ 40°C | 32 |
| cSt @ 100°C | 5.6 |
| SUS @ 100°F | 165 |
| SUS @ 210°F | 45 |
| Viscosity Index | 114 |
| Foam Test, ASTM D892, Seq. I, Ml | 0/0 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals:
Uniguide II is recommended for use in saw guide systems from all leading manufacturers, including:- Coe Newnes/McGehee
- Salem
- USNR (Schurman, Ukiah)
Additional Details:
| ISO Grade | 46 |
| Specific Gravity @ 60°F | 0.871 |
| Density, lbs/gal @ 60°F | 7.25 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 225 (437) |
| Pour Point, °C (°F) | -24 (-11) |
| Viscosity | |
| cSt @ 40°C | 46 |
| cSt @ 100°C | 7.1 |
| SUS @ 100°F | 237 |
| SUS @ 210°F | 50 |
| Viscosity Index | 113 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals:
Uniguide II is recommended for use in saw guide systems from all leading manufacturers, including:- Coe Newnes/McGehee
- Salem
- USNR (Schurman, Ukiah)
Additional Details:
| ISO Grade | 100 |
| Specific Gravity @ 60°F | 0.875 |
| Density, lbs/gal @ 60°F | 7.29 |
| Color, ASTM D1500 | 2 |
| Flash Point (COC), °C (°F) | 268 (514) |
| Pour Point, °C (°F) | -29 (-20) |
| Viscosity | |
| cSt @ 40°C | 100 |
| cSt @ 100°C | 12.4 |
| SUS @ 100°F | 518 |
| SUS @ 210°F | 69.2 |
| Viscosity Index | 117 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals:
Uniguide II is recommended for use in saw guide systems from all leading manufacturers, including:- Coe Newnes/McGehee
- Salem
- USNR (Schurman, Ukiah)
Additional Details:
| ISO Grade | 150 |
| Specific Gravity @ 60°F | 0.88 |
| Density, lbs/gal @ 60°F | 7.32 |
| Color, ASTM D1500 | 2.5 |
| Flash Point (COC), °C (°F) | 282 (540) |
| Pour Point, °C (°F) | -18 (0) |
| Viscosity | |
| cSt @ 40°C | 150 |
| cSt @ 100°C | 16 |
| SUS @ 100°F | 783 |
| SUS @ 210°F | 83.8 |
| Viscosity Index | 111 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Rust Test, ASTM D665 A&B | Pass |