VICTORY® AVIATION OIL 100AW

ASHLESS DISPERSANT, SINGLE-GRADE ENGINE OIL

Phillips 66® Victory Aviation Oil 100AW is an ashless dispersant, single-grade engine oil pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. It is recommended for use in opposed piston and radial piston aircraft engines where cam lifter wear is a concern.

VICTORY® AVIATION OIL 100AW

Features & Benefits

  • Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine
  • Pre-blended with Lycoming-approved antiwear additive
  • High film strength for protection against wear and piston scuffing
  • High viscosity index and low pour point for use over a wide temperature range
  • Protects against rust and corrosion
  • Formulated with the same high-quality base oils as used in Phillips 66 X/C® Aviation Oil

Applications

  • Opposed piston aircraft engines, especially where cam lifter wear is a concern

Technical Details

  • 50
  • Licenses & Approvals

    Victory Aviation Oil 100AW meets the requirements of:#Avco Lycoming Material Specification No. 301G#Pratt & Whitney Service Bulletin No. 1183 Rev. U#SAE Standard J1899#Teledyne Continental Material Specification MHS-24B#U.S. Military Specification MIL-L-22851D (obsolete) for additive treatment

    QPL approval number: D07L2-50

    Additional Details

    SAE Grade 50
    Gravity, °API 27
    Specific Gravity @ 60°F 0.893
    Density, lbs/gal @ 60°F 7.44
    Color, ASTM D1500 3
    Flash Point (COC), °C (°F) 255 (491)
    Pour Point, °C (°F) -27 (-17)
    Viscosity, Kinematic
    cSt @ 40°C 189
    cSt @ 100°C 19.5
    Viscosity Index 118
    Acid Number, ASTM D664, mg KOH/g 0.04
    Ash Content, SAE J1787, wt % 0.04
    Copper Corrosion, ASTM D130 Pass
    Foam Test, ASTM D892 Pass