October 11, 2022
Resistance to breaking down in the presence of oxygen is a key factor in extending the useable life of a product. A lubricant’s resistance to oxidation is decided by the very base oil chosen as well as the components of the additive package. It is worth mentioning that, while some additives classified as antioxidants and […]
October 4, 2022
Choosing which hydraulic fluid to use for a customer’s equipment can seem like a daunting task, especially to new salespeople. There is a whole world of choices out there—not just of brands, but also of varying base oils, additive contents, viscosities, and cleanliness levels. Factor in the addition of specialty products and an array of […]
March 17, 2022
Traditionally, mid-ash engine oils are recommended to prevent the buildup of silica deposits in landfill gas applications. However, Phillips 66 Lubricants now recommends using Phillips 66 El Mar® LF-D engine oil for better results for your customers. Learn more about how this unique formulation can help customers extend valve life and achieve better engine protection. […]
March 8, 2022
Quench oils play an essential role in the casting and forging of steel parts and are used across a wide range of industries. Read the white paper to learn more about how quench oils work and how to determine which Phillips 66 Lubricants quench oils to recommend for different applications. Read the White paper
February 7, 2022
There’s a higher risk of rust developing in the internal engine of an infrequently flown aircraft. Read the white paper to learn more about simple ways to store and maintain aircrafts when they are not in use, including the proper lubricants to use to help avoid expensive repairs. Read the White paper
January 26, 2022
Many operators now perform oil condition monitoring through oil analysis instead of set oil drains based on hours in service. This type of analysis tests for viscosity, metals, acid number, and oxidation, which is all useful – but it doesn’t provide a full picture of the condition of the oil. Monitoring the additive metal levels […]
November 3, 2020
The type of fluid you’re using in your systems is critical in deciding what particle count method to use. Grant Loveall, Associate Field Engineer, walks you through the differences between LaserNet Fines, APC with Solvent Dilution, and a Patch Test in the newest whitepaper. We put Phillips 66 products Megaflow® AW 46 and PowerTran® Fluid […]
October 30, 2020
Turbines are a critical technology in power generation, pipeline transmission, marine, chemical and other industries with intensive power requirements. Gas, steam and combined cycle turbine systems represent the most demanding turbine oil service conditions in power plants. Read More
October 30, 2020
Grease is a semi-solid and viscous lubricant used in machinery applications when typical lubricating oils will not stay in place. Selecting the correct grease will optimize friction and wear resistance, leading to longer component life, reduced downtime and lower operating costs. Read More