FOOD MACHINERY GREASE

EXTREME PRESSURE, ALUMINUM COMPLEX GREASE

Phillips 66® Food Machinery Grease is a premium quality, food grade, extreme pressure (EP), aluminum complex grease specially developed for the lubrication of machinery in food processing, bottling and packaging plants. It is registered by NSF International as an H1 lubricant for use where incidental food contact may occur, and also meets the requirements of the Canadian Food Inspection Agency (CFIA) for incidental food contact.

Food Machinery Grease is manufactured with high quality base oils and thickened with an aluminum complex soap. It is compounded with special food grade additives to provide excellent EP and antiwear properties, excellent oxidation resistance and good adhesion to metal surfaces. It has excellent resistance to water washout and provides excellent rust and corrosion protection in applications where the equipment is exposed to fruit acids, chemicals, or saline solutions.

You are currently viewing FOOD MACHINERY GREASE

Features & Benefits

  • Excellent oxidation resistance
  • Excellent resistance to water washout
  • Good extreme pressure and antiwear properties
  • Protects against rust and corrosion
  • Good adhesion to metal surfaces
  • Non-staining
  • Suitable for use over a wide range of operating temperatures

    Note: Aluminum complex greases have an inherent tendency to bleed a small amount of oil during storage. Containers of Food Machinery Grease should be stored in a temperature controlled environment to minimize oil separation.

Applications

  • Food processing equipment in canneries, meat packing plants and poultry plants
  • Bottling plants
  • Seamers

Technical Details

  • NLGI Grade: 2
  • Licenses & Approvals

    Food Machinery Grease meets the requirements of the following government and industry specifications: #Canadian Food Inspection Agency (CFIA) requirements for incidental food contact (LONO) #FDA 21 CFR 178.3570 for incidental food contact #NSF International H1 and former 1998 USDA H1 guidelines for incidental food contact (NSF Registration No. 142471) #U.S. EPA/U.S. Coast Guard Static Sheen Test, Federal Register Vol. 58, No.41

    Additional Details

    NLGI Grade 2
    Thickener Type Aluminum Complex
    Color White
    Texture Smooth/Tacky
    Density, lbs/gal 7.86
    Dropping Point, °C (°F), ASTM D2265 260 (500)
    Viscosity Kinematic, ASTM D445
    cSt @ 40°C 222
    cSt @ 100°C 27.2
    Penetration, Worked (60 strokes), ASTM D217 265-295
    Oxidation Stability, 100 Hours, psi (kPa), ASTM D942 5 (34.5)
    Four-Ball Wear Scar, mm, ASTM D2266 0.55
    Four-Ball EP, Weld Load, Kgf, ASTM D2596 500
    Timken OK Load, lbs, ASTM D2509 40
    Corrosion Prevention, ASTM D1743 Pass
    Copper Corrosion, ASTM D4048 1b
    Water Spray-off, wt%, ASTM D4049 27.5
Search this website Type then hit enter to search