SYNCON® PREMIUM EP GEAR OIL

SYNTHETIC PAO-BASED EXTREME-PRESSURE GEAR LUBRICANT

Phillips 66® Syncon Premium EP Gear Oil is a premium quality, synthetic, extreme pressure gear lubricant specifically recommended for lubricating the heavily loaded gears and rolling-element bearings in motorized wheel gearboxes found on mining haul trucks. It also is recommended for lubrication of enclosed industrial gear drives operating at extreme temperatures.

SYNCON® PREMIUM EP GEAR OIL

Features & Benefits

  • Outstanding oxidation resistance and thermal stability at high temperatures
  • Outstanding low-temperature properties
  • High load-carrying capacity
  • Protects against scuffing and wear
  • Protects against rust and corrosion
  • Non-chlorinated additive system
  • Suitable for year-round use
  • Extended service intervals compared to conventional mineral oil-based gear oils

Applications

  • GE motorized wheels found on mining haul trucks
  • Enclosed industrial gear drives operating at very high or very low temperatures, or operating continuously at higher than normal operating temperatures
  • Heavily loaded plain and rolling-element bearings operating at extreme temperatures
  • Applications where the equipment manufacturer recommends a synthetic extreme-pressure gear oil

Technical Details

  • ISO Grade: 320
  • Licenses & Approvals

    Syncon Premium EP Gear Oil meets the requirements of the following industry and OEM specifications:#ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP HC#GE Specification D50E27 (approved)#German Steel Industry SEB 181226, Type CLP HC#ISO 12925-1:1996, Type L-CKC#Joy Machinery Specification TO-SHEP (ISO VG 320)#U.S. Steel 224

    Additional Details

    ISO Grade 320
    AGMA Grade 6 EP
    Specific Gravity @ 60°F 0.877
    Density, lbs/gal @ 60°F 7.3
    Color, ASTM D1500 1
    Flash Point (COC), °C (°F) 238 (460)
    Pour Point, °C (°F) -34 (-30)
    Viscosity
    cSt @ 40°C 320
    cSt @ 100°C 29
    SUS @ 100°F 1682
    SUS @ 210°F 142
    Viscosity Index 123
    Acid Number, ASTM D974, mg KOH/g 0.4
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1b
    Four-Ball EP, ASTM D2783, Weld Load, kgf 250
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.36
    FZG Scuffing Test, ASTM D5182, Failure Load Stage >12
    Oxidation Stability, ASTM D2893B
    Viscosity Increase @ 121°C, % <4
    Precipitation Number, ASTM D91, mL Trace
    Rust Test, ASTM D665 A&B Pass
    Timken OK Load, ASTM D2782, lb >60
  • ISO Grade: 680
  • Licenses & Approvals

    Syncon Premium EP Gear Oil meets the requirements of the following industry and OEM specifications:#ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP HC#GE Specification D50E27 (approved)#German Steel Industry SEB 181226, Type CLP HC#ISO 12925-1:1996, Type L-CKC#Joy Machinery Specification TO-SHEP (ISO VG 320)#U.S. Steel 224

    Additional Details

    ISO Grade 680
    AGMA Grade 8 EP
    Specific Gravity @ 60°F 0.885
    Density, lbs/gal @ 60°F 7.37
    Color, ASTM D1500 1
    Flash Point (COC), °C (°F) 238 (460)
    Pour Point, °C (°F) -26 (-15)
    Viscosity
    cSt @ 40°C 680
    cSt @ 100°C 51.6
    SUS @ 100°F 3601
    SUS @ 210°F 250
    Viscosity Index 132
    Acid Number, ASTM D974, mg KOH/g 0.4
    Copper Corrosion, ASTM D130, 48 hrs @ 80°C 1b
    Four-Ball EP, ASTM D2783, Weld Load, kgf 250
    Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm 0.38
    FZG Scuffing Test, ASTM D5182, Failure Load Stage >12
    Oxidation Stability, ASTM D2893B
    Viscosity Increase @ 121°C, % <4
    Precipitation Number, ASTM D91, mL Trace
    Rust Test, ASTM D665 A&B Pass
    Timken OK Load, ASTM D2782, lb >60